DynaVox Technologies
6
There are several labels on the bottom of your device. These labels display DynaVox Technologies’ logo,
website address, phone number and mailing address. Pay special attention to the small, rectangular
sticker that can be seen when the support leg is extended. This label features your device’s unique, nine-
digit serial number. You will need this number if you call DynaVox Technologies’ Technical Support
department or if you need to arrange service for your device.
Holes for the DV4/MT4 speaker can be found beside the support leg on the bottom of the device.
Immediately above the speaker openings is a small, circular opening for the Reset button. This button
enables you to perform a hard reset of your device if you are directed to do so by a DynaVox Technologies
Technical Support representative.
The bottom of your device also features two sets of attachment points for the carrying straps that were
shipped with your device.
See Carrying Your Device
at the end of this section for more information.
Look at the right side of your device (see Figure 3). Its eight ports are each labeled with a symbol.
The first port on the left is the
USB device port
. This square port can be used to connect the
DV4/MT4 device to a computer.
The next port is the
dual USB host port
. The two USB connectors in this port enable your
device to host the connection of accessory equipment such as a computer mouse, a keyboard,
a USB storage device or a USB printer.
The
charger port
can be found to the right of the USB ports. Use this port to plug in the DC
power adapter/charger that came with your device.
Caution:
Never connect any other power adapter to your DV4/MT4 as it could cause
serious damage to your device.
Figure 3
USB Device Port
USB Host Port
Charger Port
Switch Jacks
Microphone Port
Speaker Jack
Serial Port
Summary of Contents for DV4
Page 1: ......
