Dynapac V5100TV-H, Application, Operation & Maintenance

Page: 104 / 196

E 10
2.7 Adjusting the crowning
The screed is equipped with a spindle
that can be used to set the required
crowning.
- Open centre cover (1) of the screed.
- Operate ratchet lever (2) until the
desired crowning is set.
- Check the set angle against the
scale (3).
- If necessary, switch the adjustment
angle at the drive pin (4).
A
A hydraulic crowning adjuster is availa-
ble as an option.
Adjustment is carried out and displayed
in the remote control setting menu (see
paver finisher operating instructions).
Danger of getting trapped and crushed from
moving parts
Moving vehicle parts can cause severe injuries!
- Only open flaps and covers for making adjustments!
- Do not reach into the danger area.
- Comply with all further information in these instructions
and in the safety manual.
1
2
3
4
WARNING