Dynapac V5100TV-H, Application, Operation & Maintenance

Page: 160 / 196

F 24
10 General visual inspection
A walk around the screed with the following inspections form part of the daily routine:
- Are components or controls damaged?
- Are there leaks from the hydraulic components, etc.?
- All fastening points OK?
- Are the warnings affixed to the vehicle complete and legible?
- Are the non-slip surfaces at ladders, steps, etc. in correct condition, not worn
or soiled?
m Immediately take actions to correct any detected malfunction to avoid damages, dan-
gers or environmental hazards!
11 Check that the bolts and nuts fit firmly
Bolts and nuts must be checked regularly to ensure that they fit firmly; retighten them
if necessary.
A
The spare parts catalogue states the special torques at the corresponding parts.
A
For the necessary standard torques, please refer to the section "Bolts - torques"
m Self-locking nuts are destroyed when loosened and must not be used a second time.
12 Inspection by an expert
A
Have screed and optional gas or electric system checked by a trained expert
- when required (according to the operating conditions and the nature of application),
- however, at least once a year, check that they are all in good operational condition.
13 Lubricants
13.1 Grease
A
(*) = recommended
Dynapac
Aral BP
Esso /
Exxon
Fuchs Mobil Shell Chevron
Paver
Grease
(*)
-Gadus S5
T460 1.5
-High
Temp
Premium2