Dynapac V5100TV-H, Application, Operation & Maintenance

Page: 120 / 196

E 26
5.2 Adjusting the approach angle of the
extendable parts
A
The middle sections and extendable
screed parts are adjusted parallel to
each other at the factory.
The positioning angle of the extendable
screed parts can be varied in relation to
the middle sections if required:
- Loosen cheese head screws (1) and
remove locking plate (2).
- Loosen lock nut (3). Turn adjusting nut
(4) with an open-end wrench. Spindle
(5) must not also turn.
- Turning clockwise = increases posi-
tioning angle
- Turning counter-clockwise = reduces positioning angle
A
Evenly adjust both adjusting nuts (4) at each extendable part alternately.
- Retighten the lock nut (3).
- Re-install locking plate (2) with cheese head screws (1).
EB51_Verstell4.bmp
3
4
5
1
2