Dynapac V5100TV-H, Application, Operation & Maintenance

Page: 95 / 196

E 1
E Set-up and modification
1 Notes regarding safety
f Inadvertent starting of the paver finisher can endanger persons working on the
screed.
Only carry out such work with the paver finisher motor at a standstill unless the in-
structions state the opposite!
Ensure that the paver finisher is secured to prevent unintentional starting.
f When lifted, the screed can still slide downwards if the mechanical screed transport
safeguard is not inserted on the paver finisher.
Only carry out work when the screed is secured by mechanical means!
f When connecting or disconnecting hydraulic hoses and when working on the hydrau-
lic system, hot hydraulic fluid may spurt out at high pressure.
Switch off the engine and depressurise the hydraulic system! Protect your eyes!
Always install extension parts and conversion parts in the proper manner! If in doubt,
contact the manufacturer!
Mount all protective devices before re-commissioning the paver finisher.
The walkway must always reach over the entire working width of the screed.
The hinged walkway plate (option) may only be folded up under the following condi-
tions:
- If the vehicle has to be backed up very closely to a wall or another obstacle,
- During transportation on a low-bed trailer.
Danger due to changes at the vehicle
Structural changes to the vehicle make the operating
licence null and void and can cause severe to fatal injuries!
- Only use original spare parts and approved accessories.
- After maintenance and repair work, ensure that any dis-
mantled protective and safety devices are all completely
fitted again.
- Comply with all further information in these instructions
and in the safety manual.
DANGER