Dynapac V5100TV-H Application, Operation & Maintenance Download Page 126

Page: 126 / 196

E 32

6.4

Adjusting the height of the extension

parts

To ensure that the screed lays without
marks and the extension parts can also

be adjusted to the various operating

conditions during use, the height of the

extension parts can be adjusted:

- Loosen mounting screws (1)
- Loosen lock nuts (2)
- Set to the desired height using adjust-

ing screws (3)
- Turning clockwise = raises extension

part

- Turning clockwise = lowers exten-

sion part

Adjust both adjusting screws (3) alter-
nately and evenly.

- Retighten the lock nut (2).
- Retighten the mounting screws (1).

Summary of Contents for V5100TV-H





































































































































































































Search results

Summary of Contents for V5100TV-H

Reviews:

Related manuals for V5100TV-H

Brands by name

Popular brands

Dynapac V5100TV-H, Application, Operation & Maintenance

Search results

Summary of Contents for V5100TV-H

Reviews:

Related manuals for V5100TV-H

Brands by name

Popular brands