Dynapac PL350 TD, Instruction Manual

Page: 87 / 107

Maintenance - 50h
IPL350TD-1EN2.pdf 2012-06-18
Maintenance - 50h
Make sure that ventilation (extraction) is
adequate if the engine is run in poorly ventilated
areas. Risk of carbon monoxide poisoning. Make sure that ventilation (extraction) is
adequate if the engine is run in poorly ventilated
areas. Risk of carbon monoxide poisoning.
Place the planer on a level surface.
The engine must be switched off during all
checks and adjustments of the planer, unless
otherwise specified. Place the planer on a level surface.
The engine must be switched off during all
checks and adjustments of the planer, unless
otherwise specified.
Air cleaner - emptying
Fig. Air cleaner
1. Dust trap
1
Empty the air cleaner's dust pouch (1) every 50 h by
pressing the rubber bellows with your fingers. Check
also that the air hoses are in good condition.
Clean the air cleaner when operated in extremely
dusty environments .
Fig. Front wheel, Planetary gear/position
for refilling
1. Filler plug
1
Drive wheel, Planetary gear - Check of oil level
The planetary gear is located in the front wheel.
Position the planer so that the filler plug (1) in the
planetary gear is at "9 o'clock".
Fill with oil to lower edge of level hole. Use
transmission oil. See the lubrication specification.
Clean and refit the plug.
79