Dynapac PL350 TD, Instruction Manual

Page: 58 / 107

Operation
IPL350TD-1EN2.pdf 2012-06-18
Surface milling
Fig. Surface milling
With extended right chassis leg:
The right chassis leg goes in the already milled and
cleaned first track.
Depth setting:
- right = 0
- Left = required milling depth
With right rear foldable leg folded in:
The right rear foldable leg drives in front of the milling
drum where the ground has still not been milled.
Depth setting:
Same milling depth on right and left side.
Milling at edge of roadway or at shoulders.
Fig. Milling at edge of roadway or at
shoulders.
Depth setting:
- left - required milling depth
- right - required milling depth + shoulder height,
alternatively with planer horisontal.
The planer must always be maintained in
horisontal position when planer is in milling
position! The planer must always be maintained in
horisontal position when planer is in milling
position!
50