Dynapac PL350 TD, Instruction Manual

Page: 76 / 107

Maintenance - Maintenance schedule
IPL350TD-1EN2.pdf 2012-06-18
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply. The manufacturer’s instructions found in the
engine manual also apply.
Where both operational hours and time intervals
are specified, maintenance should be carried out
at the point in time that occurs first. Where both operational hours and time intervals
are specified, maintenance should be carried out
at the point in time that occurs first.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
1 Check the oil level in diesel engine Refer to the engine manual 1 Check the oil level in diesel engine Refer to the engine manual
5 Check the fluid level in the hydraulic reservoir Top up if necessary 5 Check the fluid level in the hydraulic reservoir Top up if necessary
11 Fill fuel tank 11 Fill fuel tank
4 Check filter indicator, high-pressure hydraulic filter Replace if necessary, see
2000 h 4 Check filter indicator, high-pressure hydraulic filter Replace if necessary, see
2000 h
4 Check return oil filter, suction side, indication control
panel Replace if necessary, see
2000 h 4 Check return oil filter, suction side, indication control
panel Replace if necessary, see
2000 h
13 Fill the water tank 13 Fill the water tank
14 Check the sprinkler system 14 Check the sprinkler system
14 Check water filter Replace filter if necesssary 14 Check water filter Replace filter if necesssary
7 Check condition of milling tool and tool holder. Replace if necessary. See
section Function description 7 Check condition of milling tool and tool holder. Replace if necessary. See
section Function description
19 Check drive belt system, diesel engine Refer to the engine manual 19 Check drive belt system, diesel engine Refer to the engine manual
8 Clean hydraulic fluid cooler 8 Clean hydraulic fluid cooler
9 Check coolant level Refer to the engine manual 9 Check coolant level Refer to the engine manual
Check brakes/emergency stop Check brakes/emergency stop
Check safety function, standing plate, rear door Check safety function, standing plate, rear door
68