Dynapac PL350 TD, Instruction Manual

Page: 70 / 107

Miscellaneous
IPL350TD-1EN2.pdf 2012-06-18
supports are used the drum should rest lightly against
them.
- Protruding control equipment must be retracted or
removed.
- Lash the machine in accordance with figures 2 and 3.
- Switch off the engine and apply the parking brake.
Tie-down and secure the machine according to the
Cargo Securing Certificate for the specific machine if
this is avaliable and applicable. If not, tie down and
secure the machine according to the cargo securing
rules that are valid for the country where the transport
takes place.
Make sure that the lashing equipment, e.g.
chains, blocks and attachments in the transport
vehicle, are approved and have the requisite
breaking strain for the mode of transport. The
lashing must be held tensioned during the entire
transport. Make sure that the lashing equipment, e.g.
chains, blocks and attachments in the transport
vehicle, are approved and have the requisite
breaking strain for the mode of transport. The
lashing must be held tensioned during the entire
transport.
Fig. 2. Lashing points, 4 x
Fig 3. Side view, lashing points
62