Dynapac PL350 TD, Instruction Manual

Page: 12 / 107

Safety - General instructions
IPL350TD-1EN2.pdf 2012-06-18
16. Do not make any changes or modifications to the planer, this could put
safety at risk. Changes may only be made following the written approval of
Dynapac.
16. Do not make any changes or modifications to the planer, this could put
safety at risk. Changes may only be made following the written approval of
Dynapac.
17. Avoid using the planer before the hydraulic fluid has reached its normal
working temperature. Braking distances can be longer than normal when the
fluid is cold. See instructions in the STOP section.
17. Avoid using the planer before the hydraulic fluid has reached its normal
working temperature. Braking distances can be longer than normal when the
fluid is cold. See instructions in the STOP section.
18. For your own safety, always wear:
- a helmet
- work shoes with steel toecaps
- hearing protection
- breathing protection while milling, if necessary
- reflective clothing/high visibility vest
- work gloves
- eye protection, if necessary
18. For your own safety, always wear:
- a helmet
- work shoes with steel toecaps
- hearing protection
- breathing protection while milling, if necessary
- reflective clothing/high visibility vest
- work gloves
- eye protection, if necessary
19. Ensure sufficient ventilation (extraction of air by fan) where the engine is
run poorly ventilated spaces.
19. Ensure sufficient ventilation (extraction of air by fan) where the engine is
run poorly ventilated spaces.
4