Dynapac PL350 TD, Instruction Manual

Page: 14 / 107

Safety - when operating
IPL350TD-1EN2.pdf 2012-06-18
Slopes
Fig. Operating on slopes
Maximum permitted angle of
inclination 10°
Maximum permitted angle of
inclination 10°
The values specify the maximum permitted angle of
inclination when driving.
Bear in mind that loose ground, steering angle, the
deflection of the conveyor belt, chassis legs folded in
and the operating speed can change the center of
gravity can cause the machine to tip over on slopes
with lower gradients.
Follow the recommendations for maximum
permitted angle in the picture. Follow the recommendations for maximum
permitted angle in the picture.
Safety cannot be guaranteed when the max.
permitted angle of inclination is exceeded. Safety cannot be guaranteed when the max.
permitted angle of inclination is exceeded.
Where possible, avoid driving across slopes.
Drive instead straight up and down sloping
ground. Where possible, avoid driving across slopes.
Drive instead straight up and down sloping
ground.
6