Dynapac PL350 TD, Instruction Manual

Page: 24 / 107

Technical specifications
IPL350TD-1EN2.pdf 2012-06-18
Weights and volumes
Weights Weights
PL 350 TD PL 350 TD
Transport weight: min. - max. 4120 - 4275 kg 9085 - 9425 lbs Transport weight: min. - max. 4120 - 4275 kg 9085 - 9425 lbs
Operating weight (CE) min. - max. 4445 - 4605 kg 9800 -10150 lbs Operating weight (CE) min. - max. 4445 - 4605 kg 9800 -10150 lbs
Max operating weight, fully loaded (CE) 4950 kg 11 000 lbs Max operating weight, fully loaded (CE) 4950 kg 11 000 lbs
Machine weight without ballast min. - max. 3345 - 3505 kg 7375 - 7730 lbs Machine weight without ballast min. - max. 3345 - 3505 kg 7375 - 7730 lbs
Ballast front 550 kg 1200 lbs Ballast front 550 kg 1200 lbs
Ballast rear 545 kg 1200 lbs Ballast rear 545 kg 1200 lbs
Conveyor belt (1 m) with scraper (option) 115 kg 255 lbs Conveyor belt (1 m) with scraper (option) 115 kg 255 lbs
Fluid volumes Fluid volumes
PL350TD PL350TD
Fuel tank 125 l 33 gal Fuel tank 125 l 33 gal
Engine oil 7,5 l 8 qts Engine oil 7,5 l 8 qts
Hydraulic reservoir 110 l 116 qts Hydraulic reservoir 110 l 116 qts
Water tank 400 l 123 gal Water tank 400 l 123 gal
Planetary gear, drive wheel 0,75 l 0,8 qts Planetary gear, drive wheel 0,75 l 0,8 qts
Coolant, engine 4,5 l 4,8 qts Coolant, engine 4,5 l 4,8 qts
Working capacity
Performance PL350 TD Performance PL350 TD
Transport speed 0-5,8 km/h 0-3,5 mph Transport speed 0-5,8 km/h 0-3,5 mph
Working speed 0-25 m/min 0-0,016 mpm Working speed 0-25 m/min 0-0,016 mpm
PL350 TD PL350 TD
Milling width 350 mm 13,8 inch Milling width 350 mm 13,8 inch
Milling depth 100 mm 4 inch Milling depth 100 mm 4 inch
Line spacing 12 mm 0,5 inch Line spacing 12 mm 0,5 inch
Milling diameter 520 mm 20,5 inch Milling diameter 520 mm 20,5 inch
Number of milling tool systems
C10HD max. 42 pieces Number of milling tool systems
C10HD max. 42 pieces
16