Dynapac PL350 TD, Instruction Manual

Page: 11 / 107

Safety - General instructions
IPL350TD-1EN2.pdf 2012-06-18
Safety - General instructions
(Also read the safety manual)
1. Read the entire manual before starting the machine and before carrying out
any maintenance. Do not remove the manual from the machine. Replace the
instruction manual if lost, damaged or unreadable. 1. Read the entire manual before starting the machine and before carrying out
any maintenance. Do not remove the manual from the machine. Replace the
instruction manual if lost, damaged or unreadable.
2. The safety manual supplied with the machine must be read by all planer
operators. Always follow the safety instructions. Do not remove the manual
from the machine. 2. The safety manual supplied with the machine must be read by all planer
operators. Always follow the safety instructions. Do not remove the manual
from the machine.
3. Only trained and/or experienced operators should be allowed to drive the
planer. It is prohibited to take passengers on the planer. 3. Only trained and/or experienced operators should be allowed to drive the
planer. It is prohibited to take passengers on the planer.
4. Never use the planer if it is in need of adjustment or repair. 4. Never use the planer if it is in need of adjustment or repair.
5. Only climb up or down from the planer when it is stationary. Use the
intended grips and rails. Always use the three-point grip (both feet and one
hand, or one foot and both hands) when mounting or dismounting from the
machine. Never jump down from the machine. 5. Only climb up or down from the planer when it is stationary. Use the
intended grips and rails. Always use the three-point grip (both feet and one
hand, or one foot and both hands) when mounting or dismounting from the
machine. Never jump down from the machine.
6. Drive carefully on sharp bends. 6. Drive carefully on sharp bends.
7. Avoid driving across slopes. Drive straight up or straight down the slope. 7. Avoid driving across slopes. Drive straight up or straight down the slope.
8. Make sure that the underlying surface is sufficiently stable. 8. Make sure that the underlying surface is sufficiently stable.
9. Make sure that there are no obstacles in the direction of travel, on the
ground, in front of or behind the planer, or overhead. 9. Make sure that there are no obstacles in the direction of travel, on the
ground, in front of or behind the planer, or overhead.
10. Drive particularly carefully on uneven ground. 10. Drive particularly carefully on uneven ground.
11. Use the safety equipment provided. 11. Use the safety equipment provided.
12. Keep the planer clean. Immediately remove any dirt or grease from the
operator platform. Keep all signs and labels clean and fully legible. Replace
damaged plates and labels.
12. Keep the planer clean. Immediately remove any dirt or grease from the
operator platform. Keep all signs and labels clean and fully legible. Replace
damaged plates and labels.
13. Safety measures before refueling:
- Shut off the engine
- Do not smoke
- No naked flame in the vicinity of the machine
- Ground the filling device nozzle to the tank to avoid sparks
13. Safety measures before refueling:
- Shut off the engine
- Do not smoke
- No naked flame in the vicinity of the machine
- Ground the filling device nozzle to the tank to avoid sparks
14. Before carrying out repairs or service:
- Place chocks at the wheels
14. Before carrying out repairs or service:
- Place chocks at the wheels
15. Hearing protection is recommended if the noise level exceeds 80 dB(A). The
noise level can vary depending on the equipment on the machine and the
surface the machine is being used on.
15. Hearing protection is recommended if the noise level exceeds 80 dB(A). The
noise level can vary depending on the equipment on the machine and the
surface the machine is being used on.
3