Dynapac CC950, Instruction Manual

Page: 82 / 143

Maintenance - Maintenance schedule
4812164101_A.pdf 2022-02-09
General
Periodic maintenance should be carried out after the
number of hours specified. Use the daily, weekly etc.
periods where number of hours cannot be used.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
Where both operational hours and time intervals
are specified, maintenance should be carried out
at the point in time that occurs first. Where both operational hours and time intervals
are specified, maintenance should be carried out
at the point in time that occurs first.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
6 Check the oil level in the diesel engine Refer to the engine manual 6 Check the oil level in the diesel engine Refer to the engine manual
13 Check the hydraulic reservoir level 13 Check the hydraulic reservoir level
Check the warning lamps Check the warning lamps
1 Fill the water tank 1 Fill the water tank
9 Check the sprinkler system 9 Check the sprinkler system
4 Check for free circulation of cooling air 4 Check for free circulation of cooling air
7 Check the engine's air cleaner Refer to the engine manual 7 Check the engine's air cleaner Refer to the engine manual
4 Check the coolant level 4 Check the coolant level
10 Check the scraper setting 10 Check the scraper setting
14 Refuel 14 Refuel
Test the brakes Test the brakes
72