Dynapac CC950, Instruction Manual

Page: 22 / 143

Special instructions
4812164101_A.pdf 2022-02-09
High pressure cleaning
Do not spray water directly onto electrical components
or the instrument panels.
Place a plastic bag over the fuel filler cap and secure
with a rubber band. This is to avoid high pressure
water entering the vent hole in the filler cap. This could
cause malfunctions, such as the blocking of filters.
When working with compressed air, use the
following protective equipment: When working with compressed air, use the
following protective equipment:
Protective goggles Protective goggles
Protective gloves Protective gloves
Ear protectors Ear protectors
Do not spray with high-pressure cleaner directly onto
gaskets and bearing spacings in steering hitch and
drum, and electronics.
Never aim the water jet directly at the fuel tank
cap, or into exhaust pipe. This is particularly
important when using a high-pressure cleaner. Never aim the water jet directly at the fuel tank
cap, or into exhaust pipe. This is particularly
important when using a high-pressure cleaner.
Fire fighting
If the machine catches fire, use an ABC-class powder
fire extinguisher.
A BE-class carbon dioxide fire extinguisher can also
be used.
Fire extinguisher
A fire extinguisher can be ordered as an option.
Though, different standards are used around the world.
If not using the original fire extinguisher, place your
extinguisher as in the picture. A 4 kg extinguisher is
recommended.
Follow the installation instructions supplied with the
fire extinguisher and make sure that the location does
not create any risks.
Roll Over Protective Structure (ROPS)
Never carry out any welding or drilling in the
Roll Over Protective Structure (ROPS). Never carry out any welding or drilling in the
Roll Over Protective Structure (ROPS).
12