Dynapac CC950, Instruction Manual

Page: 52 / 143

Operation
4812164101_A.pdf 2022-02-09
Operator position
1
4, 5
2
Fig. Operator's seat
1. Seat belt
2. ROPS
4. Rubber element
5. Anti-slip
Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force. Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force.
Never use the forward/reverse levers as a handle
when mounting or disembarking from the roller. Never use the forward/reverse levers as a handle
when mounting or disembarking from the roller.
Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort. Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort.
Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction is
poor. Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction is
poor.
Machines with folding ROPS must always be
operated with the ROPS raised and locked in
position. Machines with folding ROPS must always be
operated with the ROPS raised and locked in
position.
The interlock must always be checked before
operating. To do this the operator stands up from
the seat as shown in the instructions in the
section Operation. The interlock must always be checked before
operating. To do this the operator stands up from
the seat as shown in the instructions in the
section Operation.
Inspect the ROPS for damages. Contact your
supervisor for further actions if damages are
detected. Inspect the ROPS for damages. Contact your
supervisor for further actions if damages are
detected.
42