Dynapac CC950, Instruction Manual

Page: 140 / 143

Maintenance - 2000h
4812164101_A.pdf 2022-02-09
Steering joint - Check
Fig. Steering joint
Inspect the steering joint to detect any
damage or cracks.
Check and tighten any loose bolts.
Check also for any stiffness and play in the steering
joint. Rectify if necessary.
Front drum - Changing the oil
Loosen the oil plug (1) slightly, when it is in position for
level check (2), so that it can subsequently be
unscrewed by hand.
Fig. Drum, Drive side
1. Oil plug
2. Position for level check
1
2
Park the roller on a level surface, and drive the roller
slowly until the plug (1) is in the bottom position.
Switch off the engine, disconnect the power and
push in the reserve/parking brake knob. Switch off the engine, disconnect the power and
push in the reserve/parking brake knob.
Place a receptacle that will hold at least 4 liters (1 gal)
under the plug.
Remove the plug (1) and let the oil run out.
Deliver the drained oil to special waste handling. Deliver the drained oil to special waste handling.
See under the section 'Every 500 hours of operation'
for filling oil.
130