Dynapac CC950, Instruction Manual

Page: 31 / 143

Machine description
4812164101_A.pdf 2022-02-09
Machine description
Diesel engine
The machine is equipped with an liquid-cooled, three
cylindre, diesel engine.
Electrical system
The electrical system on the machine is controlled by
relay logic. It's operated by buttons and switches.
Propulsion system/Transmission
The propulsion system is a hydrostatic system with a
hydraulic pump supplying two motors connected in
serial.
The motors drive the front and rear drums.
The speed of the machine is proportional to the
deflection/angle of the control lever from neutral.
Brake system
The brake system consists of a service brake,
secondary brake and parking brake.
The service brake is hydrostatisc and is activated by
moving the control lever to neutral.
Secondary/Parking brake
The secondary and parking brake system consists of
spring loaded brakes in the motors. The brakes are
released with hydraulic pressure and are operated
with a switch on the instrument panel.
Steering system
The steering system is a hydrostatic system.
The control value on the steering column distributes
the flow to the control cylinder, which actuates the
articulation.
The steering angle is proportional to the deflection of
the steering wheel.
Seat
Different kind of seats are available. The seat always
comply with at least the applicable requirements on
the market where the machine is originally placed.
Seat is tested and comply with seat dimension ISO
11112, SIP ISO 5353, suspension ISO7096, seat belt
ISO 6683.
ROPS
ROPS is the abbreviation for "Roll Over Protective
Structure" (ISO 3471).
21