Dynapac CC950, Instruction Manual

Page: 104 / 143

Maintenance - 50h
4812164101_A.pdf 2022-02-09
Fuel pipes - Check
Fig. Fuel filter
1. Fuel pipe
2. Clamp band
Check or replace the fuel pipes after
stopping the engine.
Broken fuel pipes can cause fires. Check or replace the fuel pipes after
stopping the engine.
Broken fuel pipes can cause fires.
If the clamp band (2) is loose, apply oil to the screw of
the band, and tighten the band securely.
Check the fuel pipe (1). Replace if wear or damage
are found.
Refer to the engine manual for detailed
instructions. Refer to the engine manual for detailed
instructions.
Dispose of the old filter carefully. Dispose of the old filter carefully.
Air cleaner - Clean
Fig. Air cleaner
1. Evacuator valve
2. Element
1
2
Open the evacuator valve (1) to get rid of large
particles of dust and dirt.
Wipe the inside air cleaner clean with cloth or like if it's
dirty or wet.
Avoid touching the element (2) except when cleaning.
When dry dust adheres to the element (2), blow
compressed air from the inside turning the element (2).
Pressure of compressed air must be under 205 kPa
(2.1 kgf/cm2, 30 psi).
Refer to the engine manual for detailed
instructions. Refer to the engine manual for detailed
instructions.
94