Dynapac CC950, Instruction Manual

Page: 105 / 143

Maintenance - 50h
4812164101_A.pdf 2022-02-09
Rubber elements and fastening screws - Check
Fig. Drum suspension
1. Rubber element
2. Fastening screws
1
2
Check all the rubber elements (1), and replace all the
elements if more than 20% of them on one side of the
drum are cracked deeper than 10-15 mm.
Use a the blade of a knife or pointed object to check.
Check also that the screw fasteners (2) are tightened.
The screws on the rubber elements are sealed
with Loctite. Check the rubber elements on both
sides of the roller. The screws on the rubber elements are sealed
with Loctite. Check the rubber elements on both
sides of the roller.
Fan belt tension - Check
Fig. Fan belt
1
Be sure the reinstall the detached safety shield
after maintenance or checking. Be sure the reinstall the detached safety shield
after maintenance or checking.
Use caution. Use the following protective
equipment: Use caution. Use the following protective
equipment:
Protective gloves Protective gloves
Stop the engine and remove the key.
Apply moderate thumb pressure to belt between the
pulleys to check if the fan belt (1) tension is correct.
Refer to the engine manual for detailed
instructions. Refer to the engine manual for detailed
instructions.
95