Dynapac CC950, Instruction Manual

Page: 21 / 143

Special instructions
4812164101_A.pdf 2022-02-09
Special instructions
Standard lubricants and other recommended
oils and fluids
Before leaving the factory, the systems and
components are filled with the oils and fluids specified
in the lubricant specification. These are suitable for
ambient temperatures in the range -15°C to +40°C
(5°F - 105°F).
The maximum ambient temperature for
biodegradable hydraulic oil is +35°C (95°F). The maximum ambient temperature for
biodegradable hydraulic oil is +35°C (95°F).
Higher ambient temperatures, above +40°C
(104°F)
For operation of the machine at higher ambient
temperatures, although m50°C (122°F), the
following recommendations apply:
The gasoline engine can be run at this temperature
using normal oil. However, the following fluids must be
used for other components:
Hydraulic system - mineral oil Shell Tellus T100 or
equivalent.
Lower ambient temperature - Freeze risk
Make sure that the watering system is empty/drained
of water (sprinkler, hoses, tank/s) or that anti-freeze
has been added, to prevent the system freezing.
Temperatures
The temperature limits apply to standard versions of
rollers.
11