Dycon D6000 MesCom Workshop Manual Download Page 65 | Manualshive

Page: 65 / 72

background image

MesCom

– Workshop Manual – D6000/i14/V10

© Dycon Ltd 2014

-

65

13 Web Configuration Service

Please note the availability of the MesCom Configuration manager service is not
guaranteed.

13.1 Using the Configuration Manager

To configure your MesCom using this service you will first need to set correct APN in your
MesCom. See section 16 for list or common APN settings.

Example:
9876 OPTION APN internet web web

Alternatively you can manually configure any/all parameters on a MesCom by SMS (see
section 5 for more details).

This is a multi-step process; all steps must be complete successfully to re-configure your
MesCom.

You will need: Your phone number, the MesCom IMEI number, printed on the metal can
inside the MesCom. And the phone number of the MesCom (for you to send the FETCH
command to via SMS).

Please Note: the configuration manager is to simplify the configuration of a MesCom - it

DOES NOT display current status of your MesCom or allow you to control the outputs.

13.1.1

Step 1: Setup the MesCom

See section 3 for details on connected and power up the MesCom.

13.1.2

Step 2: Enable the MesCom

To configure your MesCom using this configuration manager service, you will first need to
set the APN in your MesCom. See section 16 for a list of common network APN settings.

Example:
9876 OPTION APN internet web web

13.1.3

Step 3: Log in / create web manager account

Using the web browser on your smartphone, computer or any other internet connected
device, visit

http://www.dyconconfig.com/

then log in or follow the on screen instructions to

create an account. You will be asked for your phone number this is so the MesCom knows
the configuration has come from you when you send the FETCH command.

13.1.4

Step 4: Create configuration

Navigate to the type of configuration you wish to perform and follow the on-screen
instructions. Fields marked with a red star

*

must be completed as these are required by the

MesCom to process the configuration. All other fields are optional and only the fields you
complete will be changed in the MesCom.

To use the Web configuration service the SIM card installed
in the MesCom

must be internet enabled

and the

MesCom must be programmed with the correct APN detail
for the SIM card before sending the FETCH command.

«
...
63
64
65
66
67
...
»

Summary of Contents for D6000 MesCom









































































Reviews:

No comments

Related manuals for D6000 MesCom

Brand: iData Pages: 34

Brand: Panasonic Pages: 83

Brand: Yealink Pages: 6

Brand: O2 Pages: 118

Brand: Alcatel Pages: 20

Brand: Leotec Pages: 35

SoundPoint Pro SE-220

Brand: Polycom Pages: 2

Capsat TT-3060A

Brand: Thrane&Thrane Pages: 182

Brand: Sonim Pages: 1

Brand: VIA Technologies Pages: 15

Brand: T-Mobile Pages: 43

DROID DROID INCREDIBLE

Brand: HTC Pages: 206

Brand: Sony Ericsson Pages: 54

Brand: Sagem Pages: 97

Brand: Njoy Pages: 20

Brand: ZLT Pages: 11

Transform SPH-M920

Brand: Samsung Pages: 238

Brand: Samsung Pages: 203

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands