Dycon D6000 MesCom Workshop Manual Download Page 31

Page: 31 / 72

MesCom

– Workshop Manual – D6000/i14/V10

7.2.11

STOP

Stop the sender’s number receiving any more notifications –
number will remain in user list to allow use of start command.

Access Level: Any

STOP

Anything after REMOVE will be ignored

ALL supported: No

STOP

Stop receiving messages

– no response from MesCom

9876 STOP

Stop receiving messages

– no response from MesCom

Notes

This command will stop you receiving any more notifications

The reverse of this command is START.

7.2.12

START

Re-start notifications to a user if previously stopped.

Access Level: Any

9876 START

ALL supported: No

1 user per command

9876 START

restart notification to the senders number

MesCom: START Successful 04/04/12,16:15:25

Notes

The reverse of this command is STOP.

If the sender is not a user, a fail message will be returned by the MesCom.

The MesCom can be configured to restrict the START command to
administrator

’s use only - see section 7.7.25.

7.2.13

START user

Re-start notifications to a user if previously stopped.

Access Level:
Administrator

9876 START <address> <format>

The address of the user. For SMS users this is
their number phone in international format ie
+447…

ALL supported: No

Optional parameter to set the user

’s message

format.

1 user per command

9876 START +447xxxxxxxxx

restart notification to +447xxxxxxxxx

MesCom: START Successful 04/04/12,16:15:25

9876 START +447xxxxxxxxx 13

restart notification to +447xxxxxxxxx with format 13
(short message)

MesCom: START Successful 04/04/12,16:15:25

Notes

see START

Summary of Contents for D6000 MesCom









































































Search results

Summary of Contents for D6000 MesCom

Reviews:

Related manuals for D6000 MesCom

Brands by name

Popular brands

Dycon D6000 MesCom, Workshop Manual

Search results

Summary of Contents for D6000 MesCom

Reviews:

Related manuals for D6000 MesCom

Brands by name

Popular brands