MesCom
– Workshop Manual – D6000/i14/V10
© Dycon Ltd 2014
-
17
Will add the sender’s number as admin but this will only work if none of the users subscribed
to the MesCom are admin level.
– ie subsequent users cannot add themselves with this
command.
9876 447xxxxxxxxx <NewPassword> <Access> <Format> <Transport> <Username>
The ADDNUM command has been extended so all the attributes can be set - see section
7.2.6 for more detail.
Adding a user with the same address/phone number as a user already subscribed will
replace the previous user, resetting their password; a duplicate will not be created.
5.4 Removing a User
The REMOVE command, along with the STOP command, are the only commands that do
not require a password to precede them. This is to comply with best practice to electronic
communication providing the users with an intuitive method to unsubscribe from automated
message.
REMOVE
Should an administrator wish to remove another user, they may do so by providing their
password and the address of the user. See section 7.2.5 for more detail.
9876 447xxxxxxxxx
5.5 Changing a Password
Passwords can only be changed by the user themselves.
<oldPassword> PASSWORD <newPassword> <newPassword>
5.5.1 Password Recovery
Should a user forget their password, an administrator can re-create the user using the
ADDNUM command including a new password.
5.6 Stop Command
The STOP command sets the sender
’s message format to none so that they will not get any
more events messages. The user will still be subscribed to the MesCom.
STOP
To reverse this command, use the START or ADDNUM command.
5.7 Start Command
The START command sets the sender
’s format to Human so that they will get event
messages again.
9876 START +447xxxxxxxxx
Only administrators can provide the address parameter.
This command can be configured to be for administrator use only
– thereby ensuring that an
administrator is aware that someone has stopped themselves from getting message.
