Dycon D6000 MesCom Workshop Manual Download Page 36

Page: 36 / 72

MesCom

– Workshop Manual – D6000/i14/V10

7.3 Terminal Commands

The terminal connection gives the user administrator access. The terminal interface has no
password preceding the commands. All command responses exclude the

device’s name and

date. Please contact Dycon for more details on using the terminal interface.

The following additional Terminal commands are for expert use only.

7.3.1 SHOW

Show the current point values (continuously updated).

Access Level: Terminal

SHOW <type>

<type>

ALL supported: YES

SHOW

Show scaled values of enabled points.

SHOW RAW

Show raw values of enabled points.

SHOW ALL

Show raw values of all points.

Notes

Sending any character to the terminal will exit this mode.

7.3.2 DEFAULT

Reset the device to default settings.

Access Level: Terminal

DEFAULT

ALL supported: No

DEFAULT

Settings have been restored to the factory defaults.

Notes

It is recommended to perform a RESET of the MesCom after performing
this command as some settings are only loaded at power up.

7.3.3 ECHO

Enable/disable local echo on the terminal port.

Access Level: Terminal

ECHO <state>

<state>

ALL supported: No

ECHO ON

Characters send to the MesCom will be echoed back to the terminal.

ECHO OFF

Character send to the MesCom will NOT be echoed back to the terminal.

Notes

Summary of Contents for D6000 MesCom









































































Search results

Summary of Contents for D6000 MesCom

Reviews:

Related manuals for D6000 MesCom

Brands by name

Popular brands

Dycon D6000 MesCom, Workshop Manual

Search results

Summary of Contents for D6000 MesCom

Reviews:

Related manuals for D6000 MesCom

Brands by name

Popular brands