Durr Dental VistaScan Ultra View, Installation And Operating Instructions Manual

Page: 37 / 62

2170100001L29 2109V005
35
Usage
EN
Taking the X-ray
NOTICE
Damage to the image plate caused
by a sharp-edged holding system
i
Only use holding systems that will not
damage the light protection cover or
the image plates in any way
i
Do not use holding systems with
sharp edges
Wear protective gloves
i
Place the image plate in the light protection
cover into the patient's mouth
When doing this, make sure that the active
side of the image plate points towards the
X-ray tube
back
IQ
2
*+E
247
213
010
421
00/$
+01
234
567
F*
i
Set the exposure time and setting values on
the X-ray unit (see "85 X-ray unit settings")
i
Record an X-ray image
The image data must be scanned within 30
minutes
Preparing for scanning
CAUTION
Light erases the image data on the
image plate
i
Never handle exposed image plates
without the light protection cover
Wear protective gloves
i
Remove the image plate with the light protec-
tion cover from the patient's mouth
WARNING
Contamination of the unit
i
Clean and disinfect the light protec-
tion cover before removing the image
plate
i
Completely slide the image plate into the light
protection cover The white (inactive) side of
the image plate must be visible
back
IQ
2
*+E24721301042100/$+01234567F
*
back
IQ
2
*+E24721301042100/$+01234567F
*
i
Pull off the adhesive strip, fold down the flap
and close the light protection cover tightly by
pressing together firmly
i
In the case of image plates Plus size 4, place
the bite protector around the light protection
cover with image plate if necessary
back
IQ
2
*+E24721301042100/$+01234567F*
back
IQ
2
*+E24721301042100/$+01234567F*
1
2
i
The light protection cover must be disinfected
using a suitable disinfectant wipe immediately
before positioning it inside the patient's mouth
(see "12 Cleaning and disinfection")
back
IQ
2
*+E24721301042100/$+01234567F
*
i
Allow the light protection cover to fully dry
i
In the case of image plates Plus size 4, place
the bite protector around the light protection
cover with image plate if necessary