Durr Dental VistaScan Ultra View, Installation And Operating Instructions Manual

Page: 23 / 62

2170100001L29 2109V005
21
Assembly
7 Installation
7.1 Carrying the unit
NOTICE
Risk of damage to sensitive compo-
nents in the unit as a result of shocks
or vibrations
i
Do not move the unit during operation
Do not lift or move the unit by the top display
assembly Only lift the unit by the sides of the
transport drum and/or the bottom base
7.2 Setting up the unit
Portable and mobile HF communication appli-
ances can interfere with the effectiveness of
electrical medical devices
i
Do not stack the unit next to or together with
other appliances
i
If, however, this unit is operated next to other
units or stacked with other units, monitor the
unit carefully in the configuration selected in
order to ensure normal operation
The unit can be set up as a tabletop unit or
mounted on a wall using the wall bracket
The load-bearing capacity of the table or wall
must be suitable for the weight of the unit (see
"4 Technical data")
Setting the unit on a table
i
Place the unit on a firm, horizontal surface
Installing the unit with wall mounting bracket
The unit can be mounted on a wall with the wall
mounting bracket (see 33 Optional articles)
7.3 Removing the protective film
i
Grasp one corner of the protective touch
screen film and peel it off carefully
7.4 Checking the memory card
NOTICE
Data loss due to memory card.
i
Only insert or remove the memory card
when unit is switched off
i
Check whether the memory card has
been inserted in the unit correctly If
the memory card has been inserted in
the unit incorrectly, take it out again
and re-insert it properly
EN
For details of the installation refer to the
installation instructions for the wall
mounting