36
2170100001L29 2109V005
11.3 Scanning the image data via a
computer
Starting the image plate scanner and soft-
ware
The reading-out process is described using
the VistaSoft imaging software
For further information on using the imag-
ing software, refer to the relevant manual
i
Press the On/Off switch
to switch on the
device
i
Switch on the computer and monitor
i
Start VistaSoft
i
Select the patient
i
Select the corresponding image type in the
menu bar
i
Select the device
i
Set acquisition mode
Recording starts immediately When ScanMan-
ager is enabled the X-ray jobs can be selected
via the touch screen of the unit
Result:
The touch screen will display an animated visual
symbol requesting insertion of the image plate
Only insert the image plate when the bar
above the animated sequence has turned
to green
NOTICE
VistaScan Ultra View only scans
images using VistaScan Image
Plate IQ made by Dürr Dental.
i
Use only VistaScan Image Plate IQ
i
In the event of heavy soiling, eg from blood, dry
clean the light protection cover and protective
gloves, eg wipe with a clean cellulose cloth
i
Disinfect the light protection cover and protec-
tive gloves with a suitable disinfection wipe;
see "122 Light protection cover"
back
IQ
2
*+E24721301042100/$+01234567F
*
i
Pull off the protective gloves and disinfect the
hands and allow the light protection cover to
fully dry
NOTICE
Powder from the protective gloves on
the image plate can damage the unit
during scanning
i
Completely clean all traces of the pro-
tective glove powder from your hands
before handling the image plate
i
Tear off the light protection cover
Usage
EN
back
IQ
2
*+E24721301042100/$+01234567F*
Summary of Contents for VistaScan Ultra View
