Durr Dental VistaScan Ultra View, Installation And Operating Instructions Manual

Page: 8 / 62

6
2170100001L29 2109V005
Important information
The use of the accessory in combination with
other than image plate scanners manufactured
by or branded with Dürr Dental and image plates
manufactured by or branded with Dürr Dental
2.4 General safety information
i
Always comply with the specifications of all
guidelines, laws, and other rules and regula-
tions applicable at the site of operation for the
operation of this unit
i
Check the function and condition of the unit
prior to every use
i
Do not convert or modify the unit
i
Comply with the specifications of the Installa-
tion and Operating Instructions
i
The Installation and Operating Instructions
must be accessible to all operators of the unit
at all times
2.5 Specialist personnel
Operation
Operating personnel must ensure safe and correct
handling based on their training and knowledge
i
Have every user instructed in handling the unit
Installation and repairs
i
Installation, readjustments, alterations, upgrades
and repairs must be carried out by Dürr Dental
or by qualified personnel specifically approved
and authorised by Dürr Dental
2.6 Electrical safety
i
Comply with all the relevant electrical safety
regulations when working on the unit
i
Never touch the patient and unshielded plug
connections or metallic parts of the device at
the same time
i
Replace damaged cables or plugs immediately
Observe the EMC rules concerning medical
devices
i
The unit is intended for use in professional
healthcare facilities (in accordance with IEC
60601-1-2) If the appliance is operated in
another environment, potential effects on
electromagnetic compatibility must be taken
into account
i
Do not operate the unit in the vicinity of HF
surgical instruments or MRT equipment
i
Maintain a minimum distance of at least 30 cm
between the unit and other electronic devices
i
Keep a minimum distance of 30 cm between
the unit and mobile radio devices
2 Safety
The VistaScan Ultra View has been designed
and constructed so that, when used properly
and for the intended purpose, it does not pose
any danger to people or property Nevertheless,
residual risks can remain You should therefore
observe the following notes
2.1 Intended purpose
VistaScan Ultra View
The unit is intended exclusively for use in dental
applications for the scanning and processing of
image data on an image plate
VistaScan Light Protection Cover
The functions of the light protection cover are:
– to protect the image plate from light and
therefore against accidental erasure
– to protect against cross contamination
2.2 Intended use
VistaScan Ultra View
The unit may only be operated using accesso-
ries and optional articles manufactured by or
branded with Dürr Dental
The unit may only be cleaned using the disin-
fectants and cleaning agents approved by and
specified by the manufacturer
VistaScan Light Protection Cover
The light protection cover is a disposable item
The light protection cover is designed exclusively
for use with image plate scanners manufactured
by or branded with Dürr Dental and image plates
manufactured by or branded with Dürr Dental
2.3 Improper use
VistaScan Ultra View
Any other usage or usage beyond this scope
is deemed to be improper The manufacturer
accepts no liability for damages resulting from
improper usage The user bears the sole risk
This unit is not suitable for monitoring patients
over longer periods of time This unit must not be
operated in operating theaters or similar rooms,
in which dangers may arise from the combustion
of flammable materials
VistaScan Light Protection Cover
Any other usage or usage beyond this scope
is deemed to be improper The manufacturer
accepts no liability for damages resulting from
improper usage The user bears the sole risk
Especially: The multiple use of this accessory
and reprocessing contrary to instructions of the
manufacturer
EN