Digital Equipment ChannelWorks, Network Installer Manual

Page: 48 / 90

3-16 ChannelWorks Network Installer’s Guide
Loading Modified Select Parameter Groups
To load parameters that you have modified and saved for loading at a later time, per-
form the following procedure:
Note: This procedure assumes that you have performed the procedures in the “Installing The
LANcity Subscriber Utility on A PC” section and the procedures in the “Connecting A
PC to The ChannelWorks Bridge Serial Port” section.
1. With LCS displaying its Main Menu, click on Bridge. The utility displays the
Bridge Pull Down Menu.
2. Click on the Load Parameters selection. LCS displays the Bridge Load window.
Figure 3-10 shows an example.
3. Click on the Select Groups box.
4. Click on the parameter selections that you modified and saved to load at this time.
5. Click on OK. LCS loads the ChannelWorks Bridge NVRAM with the selected
parameters.
6. Close the Main Menu and continue setting up the ChannelWorks Bridge for opera-
tion.
Figure 3-10 Bridge Load Window