![background image](http://html1.mh-extra.com/html/digital-equipment/channelworks/channelworks_network-installer-manual_2498733021.webp)
1-1
1
Introduction
Introduction
This manual explains how to install the ChannelWorks Bridge, a 10 Mb/s, Ethernet-to-
cable TV, transparent, spanning-tree bridge. This chapter covers the following topics:
•
Tasks that need to be completed before beginning installation
•
Tools necessary for installation
•
How to tell that the cable TV network is certified for data delivery
Pre-Installation Tasks
This manual assumes that you have completed the following tasks:
•
The cable TV network has been prepared to communicate with the unit, that is,
certified for data delivery.
•
The unit has already been configured with the correct receive and transmit fre-
quencies for this network. The installation materials that are shipped with this
manual allow you to verify them but not to change them. If you need to change
them, you must have the ChannelWorks Cable TV Installer's Guide and authorized
software. Refer to Chapter 3, “Set-Up and First Steps,” for procedures to verify
preconfigured installation parameters.
Summary of Contents for ChannelWorks
