Digital Equipment ChannelWorks, Network Installer Manual

Page: 14 / 90

xiv ChannelWorks Network Installer’s Guide
Associated Documents
Refer to the following documents for further information:
• ChannelWorks Cable TV Installer’s Guide - Describes setting up the cable TV hea-
dend trranslator, preparing the cable TV network for data communications, config-
uring and installing the ChannelWorks Bridge, and TransMaster frequency switch
settings.
• ChannelWorks Management - Describes using the bridge’s Management Utility to
set up the ChannelWorks Bridge operating parameters, preparing the bridge for
Serial Line Interface Protocol operation, using the bridge’s enterprise specific MIB
variables to diagnose and resolve network problems, and accessing and interpret-
ting the bridge’s SNMP enterprise specific MIB Support History file.
Safety Precautions
This preface provides safety precautions to follow when installing the ChannelWorks
Bridge.
For your protection, observe the following safety precautions when setting up your
equipment:
• Follow all warnings and instructions marked on the equipment.
• Ensure that the voltage and frequency of your power source matches the voltage
and frequency inscribed on the equipment’s electrical rating label.
• Never push objects of any kind through openings in the equipment. Dangerous
voltages may be present. Conductive foreign objects could produce a short circuit
that could cause fire, electric shock, or damage to your equipment.