Digital Equipment ChannelWorks, Network Installer Manual

Page: 27 / 90

Physical Installation 2-5
Identifying Cables And Connectors
Use Figure 2-3 to identify cables that you need. Refer to this figure as you follow the
procedures in Chapter 4 for setting up the system and for installing the ChannelWorks
Bridge on the Ethernet and cable TV networks.
Before you can install the ChannelWorks Bridge on your Ethernet you will need an
appropriate cable, one of the three types discussed in the “Cable Lengths” section.
Figure 2-3 Cables And Connectors
Serial Port Null Modem Cable with 9-Pin Connectors
Diplex Filter Transmit and Receive Coax Cables with F Connectors
Ethernet (10Base5 - AUI) Thickwire Cable with 15-Pin Connector
Ethernet (10Base2- BNC) Thinwire Cable with BNC Connector
Cable TV Coaxial Cable with F Connectors