Digital Equipment ChannelWorks, Network Installer Manual, Page: 55 / 90

Starting The ChannelWorks Bridge 4-5
8. Within approximately 40 seconds, the Block Sync LED on the front of the
unit comes on, indicating the unit has properly synchronized itself to the cable TV
system. If this does not happen, turn off the power IMMEDIATELY and refer to
Chapter 5.
Note: If the cable TV network’s cables are improperly connected, the Block Sync LED will
not come on.
9. If there is traffic on either network, you will see the activity lights blink.
Figure 4-2 The ChannelWorks Bridge LED Indicators
Status LEDs