Digital Equipment ChannelWorks, Network Installer Manual

Page: 44 / 90

3-12 ChannelWorks Network Installer’s Guide
Table 3-1 ChannelWorks Bridge Operating Parameters
Control Group/Parameter Name Usage Example
Bridge Control Group
Pacer Echo Test If set a bridge that is the Pacer will Enabled/Disabled
participate in echo test
Non Pacer Echo Test If set a bridge that is not the Pacer will Enabled/Disabled
participate in echo test
IP Address Mask Mask used for IP Address Filter 255.255.255.0
IP Broadcast Address Broadcast Address for IP 255.255.255.255
Download Group
Load Server IP Address IP Address of Load Server 190.190.190.3
Load Server Gateway IP Addr IP Address of Gateway/Router 190.190.190.3
to Load Host
Load Server Filename Path name of Load File LC2.exe
Number of Retries Number of attempts to load file 5
Dump Server Group
Dump Server IP Address IP Address of Dump Server 192.190.3.10
Dump Server Gateway IP Addr IP Address of Gateway to Dump Server 192.190.57.95
Dump Server Filename Filename of dumped file lcdmp.dat
Number of Retries Number of attempts to load file 5
Filter Control Group
Broadcast Filter Filters Broadcast packets Enable/Disable
Multicast Filter Filters Multicast packets Enable/Disable
Packet Type Filter Enables packet type filtering Enable/Disable
Packet Type 1 - Packet Type 8 Value of standard Ethernet packet type Enable/Disable
Packet Pass/Block Passes/filters defined packet types Pass/Block
Security Group Filter Enables Security Group filtering Enable/Disable
Simple/Shared Specifies type of security group 2
31
Simple/31 Shared
Modem Control Group
Modem Transmit Frequency Frequency used to transmit data 20.75
on cable TV network
Modem Receive Frequency Frequency used to receive data 313.00
from cable TV network
Modem Frequency Security Set at installation, must be set to manager
modify frequencies via SNMP