Digital Equipment ChannelWorks, Network Installer Manual

Page: 49 / 90

Set-Up and First Steps 3-17
Loading All Parameter Groups
To load all parameters, perform the following procedure:
Note: This procedure assumes that you have performed the procedures in the “Installing The
LANcity Subscriber Utility on A PC” section and the procedures in the “Connecting A
PC to The ChannelWorks Bridge Serial Port” section.
1. With LCS displaying its Main Menu, click on Bridge. The utility displays the
Bridge Pull Down Menu.
2. Click on the Load Parameters selection. LCS displays the Bridge Load window.
Figure 3-10 shows an example.
3. Click on the Load All Groups box.
4. Click on OK. LCS loads the ChannelWorks Bridge NVRAM with all group
parameters.
5. Close the Main Menu and continue setting up the ChannelWorks Bridge for opera-
tion.