Digital Equipment ChannelWorks, Network Installer Manual

Page: 47 / 90

Set-Up and First Steps 3-15
4. Verify that the information entered is correct, then click on Load to load the
parameter in the unit’s NVRAM now. The Utility displays the Load parameter
confirmation window.
5. Click on Yes if you wish to load the parameter. The Utility loads the parameter
and returns you to the Main Menu.
Once you have changed (loaded) all the parameters that you wanted to change, you
should re-read the entire NVRAM, and double check that all values are now correct.
Figure 3-9 Parameter Pull Down Menu
LANcity Subscriber Utility - (defaults.dat)
Bridge Control Group