49
DIGIOP® 3D Camera User Manual
SECTION 5: CONFIGURE COUNTING LINES
NOTE
You can draw multiple enter, exit, and exclusion lines within a single camera. When drawing multiple lines around a single
entrance way, they should overlap slightly. Identical line types directly in front of or behind one another have no effect on the
resulting counts and should not be drawn.
If you need to move the line 1 pixel at a time, click the line to select it, then use the arrow keys on your keyboard to move the
line.
Acceptable use of enter/exit lines:
Lines are in between security cameras
Unacceptable use of lines
The lines are too long and two enter lines
were used so both enters and exits will be
recorded as entrances.
The lines are too long and there are two enter
lines overlapping the same area so enters are
double counted.
