34
www.digiop.com
SECTION 4: CALIBRATING AND CONFIGURING CAMERA TRACKING
Feature
Description
Defaults button
Resets all tracking parameters to factory defaults.
Note
: You should reset the parameters after upgrading if you are
upgrading from version 1.3 or earlier.
4.2 Automatically set camera height and rotation
For most installations, the DIGIOP® 3D camera can automatically calibrate its mounting height and X and Y rotation. DIGIOP®
recommends that you attempt auto calibration before manually setting the height and rotation values. Complete the following
steps to perform automatic calibration:
1.
Access the DIGIOP® 3D camera Configuration application.
2.
Click the
Calibration
tab. The Calibration tab appears.
Calibration page
3.
Ensure that the area within the green calibration box contains only the floor – no pink shaded (undefined) areas. If the box
includes displays, walls, other objects, or pink shaded areas, click the box and drag it to a different section of the image. If the
box contains only floor and no pink shaded areas, continue to step 4.
