23
DIGIOP® 3D Camera User Manual
SECTION 3: CONFIGURE THE DIGIOP® 3D CAMERA
3.3.2 Manually setting the system time
In some instances, you may not have access to a time synchronization server and will need to manually set the time on the device.
Complete the following steps to manually set the time on the D3D-2500 camera.
1.
Click
Date and Time Info
.
2.
Enter the current date in the
Date
field.
3.
Enter the current time in the
Time
field.
4.
Click
Set Tim
e to set the time on the device to the date and time that you entered.
5.
Click
Save
to update the time.
3.4 Set the Data Delivery Address
1.
Access the DIGIOP® 3D camera Configuration Application.
2.
Click
Basic Settings
, the Basic Settings – IP Address page loads.
3.
Click
Data Deliver
y. The Data Delivery options appear.
