113
DIGIOP® 3D Camera User Manual
APPENDIX C: MOUNTING GUIDELINES
APPENDIX C
Mounting Guidelines
C.1 Recess Mount Diagram
Dimensions above are in Inches.
Requirements
•
Custom made bracket for DIGIOP® 3D cameras.
•
Recess depth is 60 mm (~2.34 in).
•
Mounting hole diameter 203 mm (~8.0 in).
•
Visible diameter of mounting bracket 241 mm (~9.5 in).
•
Tilts up to 50 degrees.
•
Camera secures to bracket with 2 x ¼”-20 thread x 3/8’ machine screws.
Mounting Guidelines
•
Prior to cutting a hole for the recess mount, verify that there is hollow ceiling space at least 60 mm deep behind the recess
mounting location.
•
Camera should be oriented such that the LEDs are toward the exterior and the lenses are on the store interior.
•
Leave a 2 m (6.6 ft) maintenance loop at camera end of cable to allow easy maintenance and installation.
•
Ensure bracket is securely mounted into plaster ceiling.
•
Use t-bar and safety cabling in drop ceiling installations.
