65
DIGIOP® 3D Camera User Manual
SECTION 5: CONFIGURE COUNTING LINES
5.
Click the
Digital I/O
drop-down arrow and select
Input
.
6.
Click the
Pulse Style
drop-down and select either NPN or PNP for the type of pulse to receive.
7.
Enter the Pulse Length in milliseconds. This value sets the duration of the pulse that is received.
NOTE
Pulse length must be between 10 ms and 3000 ms.
8.
Enter the
After-Pulse Delay
in milliseconds. This value sets the minimum time in between successive pulse alerts.
9.
Click the
Zone ID
drop-down and select the zone to which pulse counts are assigned.
10. Select Enters, Exits, or both check boxes to specify which counter increments when an input pulse is received.
11. Click
Save
.
12. Connect the external input to the GPIO port as described in Section 1:
