46
www.digiop.com
SECTION 5: CONFIGURE COUNTING LINES
•
Place the exit line at the point where you consider an individual to have exited the location.
•
Do not use pass lines in the same zone with enter or exit lines.
•
Make sure that the directional circle on the enter or exit line is turned in the direction of traffic flow.
To draw counting lines:
1.
Access the DIGIOP® 3D camera Configuration application.
2.
Click the Counting tab to view the current counting configuration.
Configuration Application – Counting tab
3.
Right click in the zone list. A pop-up menu appears.
Zone List box
