Dialogic 1000Series, User Manual

Page: 16 / 326

16 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Revision History
64-0346-11 September 2011 Updated to support Version 6.0 SU8 Software.
Chapter 3, “Parameter Reference” added new Serial Ports Group section with new
parameter for Maintenance Port Enabled .
Chapter 3, “Parameter Reference” added new parameter in User-Agent Group for
User-Agent Header Value .
Chapter 3, “Parameter Reference” added new User-User Information Group section
with new parameters for User-User Enabled and Translation Method .
Chapter 3, “Parameter Reference” added new ISUP Using Multipart MIME Group
section with new parameter for France Telecom’s IE77 .
Chapter 3, “Parameter Reference” updated parameter Allowed Values for Telephony
Port Interface Side in T1/E1 Mode Group .
Chapter 3, “Parameter Reference” added new Rx/Tx Gain Control Group section with
new parameter for Analog Receive Gain .
Chapter 3, “Parameter Reference” added new parameter in T1/E1 Mode Group for
Clock Control .
Chapter 3, “Parameter Reference” added notes to parameter for Multiple Diversion
Processing in T1 ISDN Protocol Group (ISDN Signaling Mode) .
Chapter 3, “Parameter Reference” added notes to parameter for Multiple Diversion
Processing in E1 ISDN Protocol Group (ISDN Signaling Mode) .
Chapter 3, “Parameter Reference” updated names of values for Optiset_300 to
Telephony Switch Type in TDM Digital Parameters to be more clear between North
American and European configurations.
Chapter 3, “Parameter Reference” updated parameter to Default Value = -43dBm for
Fax Modem Carrier Detect Threshold (DMG1000 Only) in T.38 Fax Advanced
Settings .
Chapter 5, “Routing Table” added more information to Select Primary / Alternate
Route in Inbound TDM Rules Table and Select Primary / Alternate Route in Inbound
VoIP Rules Table to show examples of failure that may occur before the call is
connected to the outbound destination.
64-0346-10 November 2010 Updated to support Version 6.0 SU7 Software.
Chapter 3, “Parameter Reference” added new Privacy Headers Group section with
new parameters for Enable Privacy Headers and Privacy Header Method .
Chapter 3, “Parameter Reference” added new parameter in DSP Settings
Parameters for VoIP Packet Loss Concealment (DMG2000 Only) .
Document No. Publication Date Description of Revisions