Dialogic 1000Series, User Manual, Page: 112 / 326

112 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.8.1.3 Telephony Port Interface Side
Description: Identifies the side of the connection.
Allowed Values:
• Terminal = Port is Terminal Equipment (TE)
• Network = Port is Network Termination (NT)
Default Value = Terminal
INI File Parameter Name = telPortInterfaceSide
3.8.1.4 Clock Control
Description: Selects if a port receives clock from external equipment or drives clock to external
equipment.
Allowed Values:
• Automatic
• Receive
• Drive
Default Value = Automatic
INI File Parameter Name = telPortTxClkCreate
3.8.2 T1 CAS Protocol Group (T1 CAS Signaling Mode)
The parameters in the T1 CAS Protocol group include the following:
• T1 CAS Protocol
• Flash Hook
• Wait for Dial Tone after Flash Hook
• Delay After Flash-Hook
• Incoming Rings Before Answer
• Ringing Timeout
• Ring Cycle Time
• Enable Glare Detection
• Transfer Feature Code
• Consult Call Dialtone Drop Code
• Consult Call Proceeding Drop Code
• Consult Call Busy Drop Code
• Consult Call Connected Drop Code