Dialogic 1000Series, User Manual

Page: 129 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 129
Parameter Reference
3.9.1.2 Loop Current Off Debounce
Description: Specifies the time in milliseconds that loop current can be removed by the PBX on an
active call before the DMG1000 considers the line disconnected.
Allowed Values: 500 to 10000 milliseconds
Default Value = 2500 milliseconds
INI File Parameter Name = telLCOff
3.9.1.3 Incoming Rings Before Answer
Description: Specifies the number of ring bursts that must be present at the DMG1000 before the
call is presented to the IP destination as a new call.
Allowed Values: 1 to 100
Default Value = 1
INI File Parameter Name = telIncomRing
3.9.1.4 Ringing Timeout
Description: Specifies the number of milliseconds of non-ringing that will signal that an incoming
call has gone away.
Allowed Values: 100 to 10000 milliseconds
Default Value = 6000 milliseconds
INI File Parameter Name = telRingOffMs
3.9.2 Feature Code Group
The Analog parameters in the Feature Code group include:
• Transfer Feature Code
• Consult Call Dialtone Drop Code
• Consult Call Proceeding Drop Code
• Consult Call Busy Drop Code
• Consult Call Connected Drop Code
• Consult Call Disconnected Drop Code
• Consult Call Error Drop Code