Dialogic 1000Series, User Manual

Page: 198 / 326

198 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Call Progress Tones
The validation process is useful when there was an error in learning new tones and some tone
characteristics have been manually adjusted to remove conflicts. The Validate Only button can be
used to validate the changes.
Follow these steps to validate the timing and frequency characteristics of call progress tones.
1. For each call progress tone that is to be validated, determine how that tone can be generated by
the system.
2. Verify that the system will generate the call progress tone that is desired by dialing that
destination address from an extension and listening to verify the tone.
3. Navigate to the Learn Tone Web page (see Figure 21) and enter the destination addresses for
the tones to be learned.
4. Click on the Validate Only button.
5. Wait for the Validate Tone Results page to be displayed. A progress page will be displayed
showing progress messages as the system proceeds.
4.2.6 Validate Tone Progress
Once the Validate Only button has been selected, the Media Gateway will start the process of
validating the call progress tone. A progress page will automatically appear while the Gateway is
validating the tones and progress messages will be posted.
The message, Validating, means that the Gateway is redialing the destination addresses and testing
to see if the call progress tone definitions can detect the tones.
The Cancel button cancels the current session and returns to the Learn Tone Web page.
4.2.7 Validate Tone Results
When the Media Gateway has finished validating the tones, a results page will be displayed.
The validated tones are grouped into the following tone results:
• Validation Errors
• Validated Tones
After viewing the validation results, you can return to the Manual Tones Web Page (see Figure 20)
by clicking on the Return to Tone Configuration link.