Dialogic 1000Series, User Manual

Page: 321 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 321
RTP Source IP Address Validation 102
RTP Source UDP Port Validation 102
RTP Start Port 101
Selects Transmit Pulse Waveform - E1 124
Selects Transmit Pulse Waveform - T1 120
Send Early 183 Progress Response 92
Serial CPID Expiration 156
Serial Interface Protocol 153
Serial Mode (Master/Slave) 153
Serial Port Baud Rate 149
,
151
Serial Port Data Bits 150
,
152
Serial Port Parity 150
,
151
Serial Port Stop Bits 150
,
152
Server Port 63
,
65
Signaling Digit Relay Mode 93
Signaling Mode 111
sipEarlyMediaWhen180Squelched 188
sipEarlyMediaWhenAlertWithoutCPG 188
sipPhoneContextBypass 188
SIPS URI Scheme 82
sipTlsCipherListType 189
SNMP Community Name 57
SNMP Processing Enabled 55
SNMP System Contact 57
SNMP System Location 57
SNMP System Name 57
SNMP Trap IP List 56
SNMP Traps Enabled 56
SNTP Server IP Address 47
Source E-Mail Address 53
,
54
SRTP Preference 88
Static TDM Calling Party - E1 127
System Number 155
T.38 Packet Loss Concealment Method 178
T.38 UDPTL Redundancy Count for Fax Page Data 178
T.38 UDPTL Redundancy Count for T.30 Messages 179
T1 CAS Protocol 113
T1 Multiplier 68
T1 Time 67
,
68
T2 Time 68
TCP Inactivity Timer 64
,
66
TDM to IP AGC Enable 174
TDM to IP AGC Max Gain 175
TDM to IP AGC Min Gain 175
TDM to IP AGC Slew Rate 175
TDM to IP AGC Target Level 175
TDM to IP Gain Adjustment 167
TDM to TDM Media Always Clear Mode 172
Telephone-Event Payload Type 96
Telephony Port Enabled 138
Telephony Port Interface Side 112
Telnet Server Enabled 59
TLS Certificate Type 164
Tone Cadence Time 160
Tone Cadence Time Deviation 160
Tone Event 158
Tone Frequency 159
Tone Frequency Deviation 160
Tone Name 158
Transfer Feature Code 115
,
130