Dialogic 1000Series, User Manual

Page: 128 / 326

128 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.8.4.11 Enable Failover
Description: Specifies the Failover mode used when the gateway is powered down.
Note: This parameter is only applicable for DMG2060DTISQ and DMG2120DTISQ models.
Allowed Values:
• Yes = Failover enabled (span 1 to span 2) and (span 3 to span 4).
• No = Failover disabled (spans not interconnected).
Default Value = No
INI File Parameter Name = t1e1Failover
3.9 TDM Analog Parameters
The TDM Analog parameters only apply to the Models DMG1008LSW, DMG1004LSW. The
Analog parameters include the following subgroups:
• Timing Group
• Feature Code Group
• Message Waiting Control Group
• CPID Settings Group
3.9.1 Timing Group
The Analog parameters in the Timing group include:
• Flash Hook
• Loop Current Off Debounce
• Incoming Rings Before Answer
• Ringing Timeout
3.9.1.1 Flash Hook
Description: Specifies the duration in milliseconds that the DMG1000 will remain on-hook during
a hook flash operation.
Allowed Values: 50 to 4000 milliseconds
Default Value = 500 milliseconds
INI File Parameter Name = telFlashMs